Ergonomic Support Arm HHD-RZ650

Features:

1. The electric screwdriver can rotate in the X and Y directions and move up and down in the Z
direction;
2. The main and auxiliary encoders are used to record the X and Y angle coordinates of the
electric screwdriver to control the sequence of screw holes;
3. Pre-edit the coordinates and sequence of screw holes at different positions on the same series
of products. The coordinates of the screws are fed back to the host computer through the
encoder and coordinate analyzer, thereby realizing the control of the electric screwdriver enable;
4. Locking radius: 650mm;
5. The positioning accuracy is ±0.5mm;
6. The safety distance between screws should be more than 10mm.